Categories --> Undercoat & sealers

Page 1 of 4

Bondall Boncrete Description

Bondcrete - the original bonding and sealing agent has been developed and manufactured in Australia since 1951. It contains an exclusive resin additive which ensures maximum bonding strength. The Universal Problem Solver. It's users are limited only by our imagination. A must in every Handyman's shed. Bondcrete is so strong and versatile that there is seldom any need to hack, chip or acid etch the surfaces to be bonded e.g. Concretes, Bricks, Tiles, Plaster, Stone, Timber, Ceramics, Metal, Fabric, etc. Application can be either direct from the can or diluted with water in varying ratios which are dependant on the particular application. For Patching Concrete Strengthens Concrete Seals and Dust Proofs Bonds Render Seals and Weatherproofs Tile Fixing Additive Resurfaces Cement Bonds Timber Joinery Premium Inexpensive Paint Sealer Bonds Concrete Toppings

Size
 
Duralex Bleed Seal Description

Anti-stain sealer for fire and smoke damage, tar, fat and oil stained surfaces.Interior/exterior. Suitable under both water and turps thinned top coats. (Not recommended for exterior timber).

Size
 
Flood ESP Easy Surface Prep Description

ESP Easy Surface Prep cleans the old surface and leaves a permanent bonding film to which paint will adhere firmly - all in one application. Wipe it on. Wipe it off. Paint after 90 minutes. The paint will stick everytime. Guaranteed
 
PORTER'S Limeproof Undercoat Sealer Description

Porter's Limeproof Undercoat Sealer is an interior or exterior undercoat for use with all Porter's lime-based and acrylic products. Very popular amongst the trade.
 
PORTER'S All Purpose Clear Sealer Description

Porters All Purpose Clear Sealer Protects and beautifies timber, timber floorboards and concrete floors, furniture and most paint finishes. Water-based with no fumes.
 
PORTER'S Bondcote Surface Condiioner Description

Porter's Boncote Surface Conditioner Surface Conditioner is an extra binder, improves brushability, and must be used in both coats when Boncote is applied over any surface. To be added to the Boncote mixing water at a ratio of 4 parts water to 1 part Surface Conditioner
 
PORTER'S Cement Crack Sealer Description

Porter's Cement Crack Sealer For use, prior to the application of Porter's Boncote Cement Paint or Porter's Original Lime Wash. Use on new render or bagging that shows non-structural hairline cracking (caused by drying too fast). Bridges cracks up to 0.3mm and remains flexible throughout its life.
 
PORTER'S Matt Wall Sealer Description

Porter's Matt Wall Sealer is for internal use of Distemper and Interno. These very matt absorbent finishes become wipeable and stain resistant.
 
PORTER'S Mineral Silicate primer Description

Porter's Mineral Silicate Primer A water based primer specifically for use in conjunction with Porter's Mineral Paint on non-mineral surfaces where a chrystalline primer is required, or when a surface has been patched, repaired or has varying degrees of porosity, or on excessively porous surfaces where suction must be minimised. May also be used as a thinner for Porter's Mineral Paint.
 
PORTER'S Prepcoat Description

Porter's Prepcoat For use as a quick drying primer/sealer for use on absorbent or poorly bonded surfaces. Spot prime joins in plaster sheeting or fibro before application of Porter's Limeproof Undercoat Sealer. Provides an excellent seal over aged, weathered paintwork and will penetrate powdery coatings
 
[1 2 3 4]
Home | Categories | Contact