Categories --> Fillers

Page 1 of 2

POL LARGE CRACKS Description

POLYFILLA* READY TO USE LARGE CRACKS is available in 330g and 770g plastic tubes, and 2.1kg plastic pails. USES POLYFILLA* READY TO USE LARGE CRACKS is suitable for cracks, gouges, dents, chips and surface imperfections in mortar, concrete, timber, plaster and primed metal. TECHNICAL FEATURES Interior and exterior. Durable. Sandable. Paintable. Ready to use, no mixing. Minimal shrinkage. Good adhesion to many surfaces
 
POLY EXPANDING -FOAM Description

DESCRIPTION POLYFILLA*EXPANDING FOAM is a one-component, self-expanding, ready to use polyurethane foam filler incorporating a CFC-free propellant. After extruding from the can, POLYFILLA* EXPANDING FOAM further expands while curing to a semi-rigid closed cell foam. SIZES AVAILABLE 390g Aerosol can 750g Aerosol can USES POLYFILLA*EXPANDING FOAM is fast, convenient and economical means of filling large, irregular shaped gaps, hollows and cavities in buildings to block draughts, dust, noise, insects and birds. TECHNICAL FEATURES Convenient to use one-pack system (no mixing required). Fast curing. Strong adhesion to most surfaces. Extension nozzle for easy application. Can be overpainted. Cured product can be cut, trimmed, sanded, plastered and painted. No HCFC or CFC propellant. Expands up to 2 1/2 times after application. Durable (suitable for interior/exterior use), will not shrink
 
POLY EXTERIOR POLYFILLA Description

DESCRIPTION POLYFILLA* POWDER EXTERIOR is a vinyl reinforced grey cement-based filler for exterior and interior use. SIZES AVAILABLE POLYFILLA* POWDER EXTERIOR is available in 500g, 2kg and 5kg bags. USES POLYFILLA* POWDER EXTERIOR is designed for filling cracks and holes in bricks, cement, stone and other masonry surfaces. It is also ideal for use in interior wet areas and as ceramic floor tile cement. TECHNICAL FEATURES Waterproof. Resistant to temperature and humidity changes when set. Easy to mix and apply. Takes nails and screws without breaking away or splitting. Grey colour matches cement when set. POLYFILLA* POWDER EXTERIOR will not shrink when used in accordance with directions, thus it is suitable for use in patching steps, paths, paving etc. POLYFILLA* POWDER EXTERIOR is formulated to allow sanding whilst maintaining the strength of cement.
 
Poly GAP SEALANT Description

POLYFILLA* GAP SEALANT may be used for sealing gaps and joints where some movement is anticipated. TECHNICAL FEATURES • Excellent adhesion to timber, plasterboard, brick, glass, aluminium, ceramics, painted surfaces and many other building materials. • Flexible - will withstand joint movement of +/- 10% of joint width. Suitable for those applications where slight movement causes hard fillers to crack and fall out. • Paintable with water and oil based paints without need of priming. Please refer to Note†: • Weatherproof - suitable for interior and exterior applications. • Sag resistant. • Easy to apply. • Water clean-up. • Low odour - can be used in any environment without discomfort.
 
POLY INTERIOR FILLER Description

DESCRIPTION POLYFILLA* POWDER INTERIOR is a cellulose reinforced white plaster filler. It is a crack and hole filler for interior use. SIZES AVAILABLE Available in 500g, 1kg, 2kg and 5kg bags. It also comes in 6kg and 10kg buckets. USES POLYFILLA* POWDER INTERIOR is ideal for interior filling of cracks and holes in plaster, plasterboard, brick, masonry and wood. Can be used also for modelling and sculpting. TECHNICAL FEATURES Non-shrink on drying. Withstands vibration. Good adhesion. Can be nailed or screwed. Dries in about 1 hour. Sandable & Paintable after 2-3 hours. Sands easily to a smooth finish. Indefinite shelf life if stored in dry conditions.
 
Poly INTERIOR TIMBER Description

POLYFILLA* READY TO USE INTERIOR TIMBER is ideal for interior woodwork. It may be used for filling cracks, nail holes, chips and dents. It is ideal for grain and edge filling for obtaining a smooth mirror finish on painted surfaces. TECHNICAL FEATURES Fast drying. Dries to a natural pine colour. Excellent sandability. Can be tinted, stained, painted or varnished. Ready to use, no mixing. Minimal shrinkage. May be nailed or planed
 
POLY MIRROR FINISH Description

DESCRIPTION POLYFILLA* READY TO USE MIRROR FINISH is a ready to use filler that sands to a hard and durable mirror finish. It is white in colour and is for interior & exterior use. SIZES AVAILABLE POLYFILLA* READY TO USE MIRROR FINISH is available in 425g and 950g plastic tubes. USES POLYFILLA* READY TO USE MIRROR FINISH is ideal for small cracks and surface imperfections in interior timber, plaster, concrete, mortar and primed metal. It sands to a smooth mirror finish for perfect gloss retention. TECHNICAL FEATURES Excellent for use when painting with gloss paints. Fast drying. Sands to a durable mirror finish. Easy to sand. Paintable. Ready to use, no mixing. Minimal shrinkage. Interior and Exterior.
 
POLY PUTTY Description

DESCRIPTION POLYFILLA* WOODFLEX is a ready mixed, acrylic based, flexible filler for weatherboard and other exterior woodwork. SIZES AVAILABLE POLYFILLA* WOODFLEX is available in a 600g tub. USES POLYFILLA* WOODFLEX is recommended for filling cracks, holes and splits in timber, particularly weatherboard, decking and fencing. POLYFILLA* WOODFLEX is also suitable for use on fibro and brick. TECHNICAL FEATURES Extremely flexible, will not fall out when timber expands and contracts. POLYFILLA* WOODFLEX has excellent adhesion to painted and unpainted timber, including cracks and holes arising from rot (remove rotted timber first). Sands to a smooth finish. No priming required before repainting. Minimal shrinkage on drying. Can be tinted with paint tinters or stained. Keeps well in airtight plastic container
 
POLY SKIM COAT Description

DESCRIPTION POLYFILLA* READY TO USE SKIM COAT is a ready to use filler for filling fine surface imperfections on plaster and plasterboard. It is cream in colour; sands very easily and is paintable. It is designed for interior use only. SIZES AVAILABLE POLYFILLA* READY TO USE SKIM COAT is available in 520g and 1.17kg plastic tubes, and 3.3kg tub. USES POLYFILLA* READY TO USE SKIM COAT is ideal for filling over small (shallow) surface imperfections on interior plaster and plasterboard. It sands extremely easily to a feathered edge and can be overpainted by brush or roller. Undercoat should be applied before final painting. TECHNICAL FEATURES Ready to use, no mixing. Easily sanded to a feathered edge. Paintable by brush or roller
 
POLY WOODFLEX Description

DESCRIPTION POLYFILLA* WOODFLEX is a ready mixed, acrylic based, flexible filler for weatherboard and other exterior woodwork. SIZES AVAILABLE POLYFILLA* WOODFLEX is available in a 600g tub. USES POLYFILLA* WOODFLEX is recommended for filling cracks, holes and splits in timber, particularly weatherboard, decking and fencing. POLYFILLA* WOODFLEX is also suitable for use on fibro and brick. TECHNICAL FEATURES Extremely flexible, will not fall out when timber expands and contracts. POLYFILLA* WOODFLEX has excellent adhesion to painted and unpainted timber, including cracks and holes arising from rot (remove rotted timber first). Sands to a smooth finish. No priming required before repainting. Minimal shrinkage on drying. Can be tinted with paint tinters or stained. Keeps well in airtight plastic container
 
[1 2]
Home | Categories | Contact